Skip to main content
WaterSafeCheck

Fort Howard, MD Tap Water Quality

Water safety reports for all 1 ZIP code in Fort Howard, Maryland

Average Score

63/100

Health Violations

0

ZIP Codes

1

High Lead Risk

1

of 1 ZIP codes

C

About Tap Water in Fort Howard, MD

Water quality in Fort Howard, MD is currently rated with a moderate C grade (average score: 63/100 across 1 ZIP code). This rating indicates that while the water provided by CITY OF BALTIMORE is treated and regulated, there have been notable compliance issues or contaminant detections recently. Residents should stay informed about the specific challenges affecting their local supply.

A major factor in Fort Howard's high rating is its flawless health-based violation record. Over the past 5 years of EPA tracking, local water systems have recorded zero health-based violations. This means that regulated contaminants—such as lead, arsenic, and harmful bacteria—have not exceeded the Maximum Contaminant Levels (MCLs) allowed by federal law. Drawing primarily from surface water, the city utilizes advanced filtration to maintain this standard.

Additionally, lead exposure risk remains a critical issue for certain neighborhoods. EPA data indicates that 1 out of 1 ZIP codes in Fort Howard are rated as High or Very High risk for lead. This risk is often driven by aging homes with pre-1986 plumbing containing lead solder or service lines. Families in these areas should test their tap water and consider NSF/ANSI 53 certified filters.

⚠ Lead Risk Alert: Some ZIP codes in Fort Howard are rated High or Very High for lead exposure risk based on EPA data. Search your specific ZIP code for a detailed lead level report.

Water Quality by ZIP Code — Fort Howard, MD

Click any ZIP code for the full water quality report

C
21052

Fort Howard, MD

Score: 63/100✓ No violations

Frequently Asked Questions — Fort Howard Water Quality

Is tap water safe to drink in Fort Howard, MD?+
Tap water in Fort Howard has a grade of C, indicating compliance concerns in recent years. Families with young children or pregnant women should consider using a certified NSF/ANSI 53 water filter for drinking and cooking.
What is the water quality score for Fort Howard?+
The average water quality score across 1 ZIP code in Fort Howard, MD is 63/100. Scores are derived from EPA violation history, lead levels, enforcement actions, and infrastructure risk indicators. Individual ZIP codes may vary — search your specific ZIP above for a personalized report.
Does Fort Howard have lead in its tap water?+
1 out of 1 ZIP codes in Fort Howard are rated High or Very High for lead exposure risk. Older homes built before 1986 may have lead service lines or plumbing fixtures. Residents should run their tap for 30 seconds before use and consider a certified NSF/ANSI 53 lead filter.
How do I get the water quality report for Fort Howard?+
Each ZIP code in Fort Howard has a full water quality report on this site — click any ZIP code below. You can also get the annual Consumer Confidence Report (CCR) from your local water utility. The CCR is required to be published every year by July 1 and contains actual contaminant measurements and violation history.
Where does Fort Howard's tap water come from?+
Tap water in Fort Howard, MD primarily comes from surface water. Surface water systems treat water from rivers, lakes, or reservoirs using filtration, sedimentation, and disinfection before it reaches your tap.

Looking for water quality in other cities in Maryland?

View All Cities in Maryland →