Skip to main content
WaterSafeCheck

ZIP Code 01081 Water Quality Report

Wales, MA · Hampden County County

Safety Score
B

Water Safety Grade

Good — Minor issues on record

Health Violations

0

Total Violations

1

Lead Risk

High

Contaminants

0

⚠

Active Water Quality Issues Detected

EPA records show 0 unresolved violation and 1 boil water advisory. Contact Brookside Village for current status.

About Tap Water in ZIP Code 01081

Tap water in ZIP code 01081 (Wales, MA) meets all federal safety standards and earns a solid B grade (score: 83/100). Served by Brookside Village, the water system has maintained general compliance with EPA Safe Drinking Water Act regulations, with only minor issues on record.

Water System

Brookside Village

EPA ID: MA1306001

Water Source

Ground Water

Population Served

80 residents

County

Hampden County County, Massachusetts

🧪

Lead Levels in ZIP 01081

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 3.1 ppb — Very Low

The 90th percentile lead level in 01081 is 3.1 ppb, well below the EPA action level of 15 ppb. While this is a reassuring result, the EPA's public health goal for lead is actually zero — no amount of lead is considered completely safe, particularly for children under 6 and pregnant women. Running your tap for 30 seconds before use and using a certified NSF/ANSI 53 filter adds an extra layer of protection.

Lead exposure risk in 01081 is rated High. EPA models estimate a 47% probability of lead exposure risk in this ZIP code based on housing age, infrastructure age, and water system data. This typically reflects older housing stock built before 1986 (when lead pipes were banned), aging distribution infrastructure, or detected lead levels in water samples. Families should prioritize getting their tap water tested independently and installing a certified lead-reducing filter.

Lead Level (90th percentile)
3.10 ppb (0.0031 mg/L)
Lead Exposure Risk Rating
High
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

47%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
📋

Violation History

Past 5 years — EPA SDWIS data

Brookside Village has recorded 1 violation, but none are health-based. Administrative or reporting violations don't directly indicate unsafe water, but they do signal gaps in documentation or monitoring procedures. Additionally, this area has had 1 boil water advisory — temporary orders issued when microbial contamination risk is elevated.

Total Violations (5 yr)
1
Health-Based Violations
0
Unresolved Violations
0
Boil Water Advisories
1
Compliance Risk
Moderate

Regulatory compliance risk is rated Moderate. Brookside Village has had occasional lapses in compliance but generally meets Safe Drinking Water Act requirements.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 01081. This means EPA monitoring has not found levels of regulated contaminants exceeding the Maximum Contaminant Levels (MCLs) set under the Safe Drinking Water Act — a positive indicator of water quality compliance.

⚖ Enforcement Actions

3 enforcement actions have been issued against Brookside Village — a high number that reflects sustained compliance struggles. Enforcement actions escalate from administrative orders to financial penalties when utilities repeatedly fail to meet safe drinking water standards.
🌊

Water Source & Environmental Factors

Ground Water

This system draws water from underground aquifers. Groundwater is naturally filtered through soil and rock, but can still contain naturally occurring minerals like arsenic, radium, or nitrates.

Water Source Type
Ground Water
EPA Radon Zone

Moderate potential

Zone 2
Energy Burden

% of household income spent on energy — indicator of older infrastructure

3.71%

EPA Radon Zone 2 — moderate radon potential. The EPA recommends testing your home regardless of zone designation.

🛡 What Should You Do? — ZIP 01081 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from Brookside Village
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Frequently Asked Questions — ZIP 01081 Water Quality

Is tap water safe to drink in ZIP code 01081?+
Yes — tap water in 01081 (Wales, MA) currently meets all federal EPA standards with a water safety grade of B. No health-based violations are on record in the past 5 years. You can drink your tap water with confidence, though running the tap for 30 seconds in the morning is always a good practice.
What is the lead level in 01081 tap water?+
The 90th percentile lead level in 01081 is 3.1 ppb (parts per billion). The EPA action level is 15 ppb. This is a low level, well below the EPA action level of 15 ppb.
Who provides tap water to 01081?+
Tap water in ZIP code 01081 is provided by Brookside Village (EPA ID: MA1306001). This system serves approximately 80 residents. You can contact them directly for Consumer Confidence Reports, current advisories, and billing information.
What is the water source for 01081?+
ZIP code 01081 is served by ground water. Groundwater systems draw from underground aquifers. While naturally filtered, groundwater can still contain naturally occurring contaminants such as arsenic, radium, or nitrates at elevated levels in some regions.
Does 01081 have any active water quality violations?+
No active violations are on record for ZIP code 01081. EPA data shows this water system is currently in compliance with Safe Drinking Water Act standards.
How do I get a copy of my water quality report for 01081?+
Your water utility — Brookside Village — is required by law to send you an annual Consumer Confidence Report (CCR) by July 1 each year. You can also request it directly from the utility or find it online by searching "Brookside Village Consumer Confidence Report." The EPA's ECHO database also has historical compliance data.
What water filter should I use in 01081?+
The right filter depends on what contaminants are present. For lead, look for a filter certified to NSF/ANSI Standard 53. For chlorine byproducts (like THMs), NSF/ANSI 42 filters work well. For a broad range of contaminants including PFAS, look for NSF/ANSI 58 (reverse osmosis) systems. For ZIP code 01081, with a clean compliance record, a standard carbon block filter meeting NSF/ANSI 42 is a good choice for taste and as a precaution.
Is 01081 tap water safe for babies and infants?+
Infants are especially vulnerable to lead, nitrates, and microbial contaminants in drinking water. Current EPA data for 01081 shows a lead level of 3.1 ppb — below the action level, but as an extra precaution, run your tap for 30 seconds before use and consider a certified lead filter for infant formula. Always consult your pediatrician for guidance specific to your child's health.

Data Sources & Methodology

Water quality data for ZIP code 01081 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by Brookside Village. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →