Skip to main content
WaterSafeCheck

ZIP Code 04086 Water Quality Report

Topsham, ME · Sagadahoc County County

Safety Score
B

Water Safety Grade

Good — Minor issues on record

Health Violations

0

Total Violations

11

Lead Risk

Moderate

Contaminants

0

⚠

Active Water Quality Issues Detected

EPA records show 2 unresolved violations. Contact Brunswick/topsham Water District for current status.

About Tap Water in ZIP Code 04086

Tap water in ZIP code 04086 (Topsham, ME) meets all federal safety standards and earns a solid B grade (score: 75/100). Served by Brunswick/topsham Water District, the water system has maintained general compliance with EPA Safe Drinking Water Act regulations, with only minor issues on record.

Water System

Brunswick/topsham Water District

EPA ID: ME0090260

Water Source

Ground Water

Population Served

18,250 residents

County

Sagadahoc County County, Maine

🧪

Lead Levels in ZIP 04086

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 0.3 ppb — Very Low

The 90th percentile lead level in 04086 is 0.3 ppb, well below the EPA action level of 15 ppb. While this is a reassuring result, the EPA's public health goal for lead is actually zero — no amount of lead is considered completely safe, particularly for children under 6 and pregnant women. Running your tap for 30 seconds before use and using a certified NSF/ANSI 53 filter adds an extra layer of protection.

Lead exposure risk in 04086 is rated Moderate. EPA models estimate a 40% probability of lead exposure risk in this ZIP code based on housing age, infrastructure age, and water system data. This may reflect a mix of older and newer housing stock and infrastructure. Families with young children should test their home's water and consider a certified NSF/ANSI 53 water filter.

Lead Level (90th percentile)
0.30 ppb (0.0003 mg/L)
Lead Exposure Risk Rating
Moderate
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

40%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
📋

Violation History

Past 5 years — EPA SDWIS data

Brunswick/topsham Water District has recorded 11 violations, but none are health-based. Administrative or reporting violations don't directly indicate unsafe water, but they do signal gaps in documentation or monitoring procedures. 2 violations are currently unresolved — meaning the issue has not yet been formally corrected in EPA records. This is a serious concern that residents should follow up on with their water utility.

Total Violations (5 yr)
11
Health-Based Violations
0
Unresolved Violations
2
Boil Water Advisories
0
Compliance Risk
High

Regulatory compliance risk is rated High. Brunswick/topsham Water District has a pattern of compliance issues that goes beyond isolated incidents. Residents should stay informed via their utility's Consumer Confidence Report.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 04086. This means EPA monitoring has not found levels of regulated contaminants exceeding the Maximum Contaminant Levels (MCLs) set under the Safe Drinking Water Act — a positive indicator of water quality compliance.

⚖ Enforcement Actions

10 enforcement actions have been issued against Brunswick/topsham Water District — a high number that reflects sustained compliance struggles. Enforcement actions escalate from administrative orders to financial penalties when utilities repeatedly fail to meet safe drinking water standards.
🌊

Water Source & Environmental Factors

Ground Water

This system draws water from underground aquifers. Groundwater is naturally filtered through soil and rock, but can still contain naturally occurring minerals like arsenic, radium, or nitrates.

Water Source Type
Ground Water
EPA Radon Zone

Moderate potential

Zone 2
Annual Flood Risk Cost

Estimated annual flood-related costs per property

$0
Energy Burden

% of household income spent on energy — indicator of older infrastructure

3.87%

EPA Radon Zone 2 — moderate radon potential. The EPA recommends testing your home regardless of zone designation.

🛡 What Should You Do? — ZIP 04086 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from Brunswick/topsham Water District
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Frequently Asked Questions — ZIP 04086 Water Quality

Is tap water safe to drink in ZIP code 04086?+
Yes — tap water in 04086 (Topsham, ME) currently meets all federal EPA standards with a water safety grade of B. No health-based violations are on record in the past 5 years. You can drink your tap water with confidence, though running the tap for 30 seconds in the morning is always a good practice.
What is the lead level in 04086 tap water?+
The 90th percentile lead level in 04086 is 0.3 ppb (parts per billion). The EPA action level is 15 ppb. This is a low level, well below the EPA action level of 15 ppb.
Who provides tap water to 04086?+
Tap water in ZIP code 04086 is provided by Brunswick/topsham Water District (EPA ID: ME0090260). This system serves approximately 18,250 residents. You can contact them directly for Consumer Confidence Reports, current advisories, and billing information.
What is the water source for 04086?+
ZIP code 04086 is served by ground water. Groundwater systems draw from underground aquifers. While naturally filtered, groundwater can still contain naturally occurring contaminants such as arsenic, radium, or nitrates at elevated levels in some regions.
Does 04086 have any active water quality violations?+
Yes — there are currently 2 unresolved violations on record for this water system. Unresolved violations indicate issues that have not yet been formally corrected in EPA tracking systems. Contact Brunswick/topsham Water District for the latest update.
How do I get a copy of my water quality report for 04086?+
Your water utility — Brunswick/topsham Water District — is required by law to send you an annual Consumer Confidence Report (CCR) by July 1 each year. You can also request it directly from the utility or find it online by searching "Brunswick/topsham Water District Consumer Confidence Report." The EPA's ECHO database also has historical compliance data.
What water filter should I use in 04086?+
The right filter depends on what contaminants are present. For lead, look for a filter certified to NSF/ANSI Standard 53. For chlorine byproducts (like THMs), NSF/ANSI 42 filters work well. For a broad range of contaminants including PFAS, look for NSF/ANSI 58 (reverse osmosis) systems. For ZIP code 04086, with a clean compliance record, a standard carbon block filter meeting NSF/ANSI 42 is a good choice for taste and as a precaution.
Is 04086 tap water safe for babies and infants?+
Infants are especially vulnerable to lead, nitrates, and microbial contaminants in drinking water. Current EPA data for 04086 shows a lead level of 0.3 ppb — below the action level, but as an extra precaution, run your tap for 30 seconds before use and consider a certified lead filter for infant formula. Always consult your pediatrician for guidance specific to your child's health.

Data Sources & Methodology

Water quality data for ZIP code 04086 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by Brunswick/topsham Water District. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →