Skip to main content
WaterSafeCheck

ZIP Code 10200 Water Quality Report

New York, NY

Safety Score
D

Water Safety Grade

Poor — Multiple violations recorded

Health Violations

0

Total Violations

4

Lead Risk

N/A

Contaminants

0

⚠

Active Water Quality Issues Detected

EPA records show 0 unresolved violation. Contact New York City System for current status.

About Tap Water in ZIP Code 10200

Tap water in ZIP code 10200 (New York, NY) has received a D grade (score: 48/100) — below average for the nation. New York City System has recorded notable violations with EPA Safe Drinking Water Act regulations. Residents may want to consider additional filtration and review their annual Consumer Confidence Report.

Water System

New York City System

EPA ID: NY7003493

Water Source

Surface Water

Population Served

8,271,000 residents

🧪

Lead Levels in ZIP 10200

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 10.0 ppb — Below Action Level

The 90th percentile lead level in 10200 is 10.0 ppb, below the EPA action level of 15 ppb but above what many health experts consider ideal. The CDC and EPA both affirm there is no safe level of lead exposure for children. Families with young children or pregnant women should consider a certified NSF/ANSI 53 water filter, and request lead testing of their home's tap water.
Lead Level (90th percentile)
10.00 ppb (0.01 mg/L)
Lead (Consumer Confidence Report)

From annual CCR filing

100 ppb
Lead Exposure Risk Rating
Unknown
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
📋

Violation History

Past 5 years — EPA SDWIS data

New York City System has recorded 4 violations, but none are health-based. Administrative or reporting violations don't directly indicate unsafe water, but they do signal gaps in documentation or monitoring procedures.

Total Violations (5 yr)
4
Health-Based Violations
0
Unresolved Violations
0
Boil Water Advisories
0
Compliance Risk
Moderate

Regulatory compliance risk is rated Moderate. New York City System has had occasional lapses in compliance but generally meets Safe Drinking Water Act requirements.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 10200. This means EPA monitoring has not found levels of regulated contaminants exceeding the Maximum Contaminant Levels (MCLs) set under the Safe Drinking Water Act — a positive indicator of water quality compliance.

From Consumer Confidence Report:

Lead (100 ppb*)

⚖ Enforcement Actions

10 enforcement actions have been issued against New York City System — a high number that reflects sustained compliance struggles. Enforcement actions escalate from administrative orders to financial penalties when utilities repeatedly fail to meet safe drinking water standards.
🌊

Water Source & Environmental Factors

Surface Water

This system draws water from lakes, rivers, or reservoirs. Surface water is treated to remove sediment, microorganisms, and chemical contaminants before reaching taps.

Water Source Type
Surface Water
CCR Source Classification
Surface Water and Ground Water
EPA Radon Zone

Highest potential

Zone 1

EPA Radon Zone 1 — highest potential for radon in indoor air. Homeowners should test their home for radon and consider mitigation if levels exceed 4 pCi/L.

🛡 What Should You Do? — ZIP 10200 Recommendations

  • 🚨 Install a certified NSF/ANSI 53 or 58 (reverse osmosis) filter immediately for drinking and cooking
  • 🚨 Do not give unfiltered water to children, pregnant women, or immunocompromised individuals
  • 🚨 Contact New York City System to request the current violation status and corrective action plan
  • 🚨 Report concerns to your state environmental agency or call the EPA hotline: 1-800-426-4791
  • 🚨 Consider having your home's tap water independently tested by a certified lab

Frequently Asked Questions — ZIP 10200 Water Quality

Is tap water safe to drink in ZIP code 10200?+
Tap water in 10200 has a below-average water quality grade of D. While it is treated, there have been notable compliance issues. We strongly recommend using a certified NSF/ANSI 53 water filter for drinking and cooking, especially for vulnerable populations.
What is the lead level in 10200 tap water?+
The 90th percentile lead level in 10200 is 10.0 ppb (parts per billion). The EPA action level is 15 ppb. This is below the action level, but some health experts recommend a lead filter for families with young children.
Who provides tap water to 10200?+
Tap water in ZIP code 10200 is provided by New York City System (EPA ID: NY7003493). This system serves approximately 8,271,000 residents. You can contact them directly for Consumer Confidence Reports, current advisories, and billing information.
What is the water source for 10200?+
ZIP code 10200 is served by surface water. Surface water systems draw from rivers, lakes, or reservoirs and must meet strict EPA treatment requirements including filtration and disinfection.
Does 10200 have any active water quality violations?+
No active violations are on record for ZIP code 10200. EPA data shows this water system is currently in compliance with Safe Drinking Water Act standards.
How do I get a copy of my water quality report for 10200?+
Your water utility — New York City System — is required by law to send you an annual Consumer Confidence Report (CCR) by July 1 each year. You can also request it directly from the utility or find it online by searching "New York City System Consumer Confidence Report." The EPA's ECHO database also has historical compliance data.
What water filter should I use in 10200?+
The right filter depends on what contaminants are present. For lead, look for a filter certified to NSF/ANSI Standard 53. For chlorine byproducts (like THMs), NSF/ANSI 42 filters work well. For a broad range of contaminants including PFAS, look for NSF/ANSI 58 (reverse osmosis) systems. For ZIP code 10200, with a clean compliance record, a standard carbon block filter meeting NSF/ANSI 42 is a good choice for taste and as a precaution.
Is 10200 tap water safe for babies and infants?+
Infants are especially vulnerable to lead, nitrates, and microbial contaminants in drinking water. Given the detected lead level of 10.0 ppb in 10200, we recommend using a certified NSF/ANSI 53 water filter or certified bottled water for preparing infant formula. Always consult your pediatrician for guidance specific to your child's health.

Data Sources & Methodology

Water quality data for ZIP code 10200 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by New York City System. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →