Skip to main content
WaterSafeCheck

ZIP Code 38674 Water Quality Report

Tiplersville, MS · Tippah County County

Safety Score
A

Water Safety Grade

Excellent — Meets all EPA standards

Health Violations

0

Total Violations

3

Lead Risk

High

Contaminants

0

⚠

Active Water Quality Issues Detected

EPA records show 1 unresolved violation. Contact City of Ripley for current status.

About Tap Water in ZIP Code 38674

Tap water in ZIP code 38674 (Tiplersville, MS) is among the safest in the country. Served by City of Ripley, this area earned a water safety grade of A with a composite score of 85/100 — indicating full regulatory compliance and low contaminant risk across EPA monitoring periods.

Water System

City of Ripley

EPA ID: MS0700008

Water Source

Ground Water

Population Served

11,351 residents

County

Tippah County County, Mississippi

🧪

Lead Levels in ZIP 38674

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Data Not Available

Lead testing data was not found in EPA records for ZIP code 38674. This may occur with very small systems or systems that report under a parent utility. Contact City of Ripley directly to request lead testing results or a copy of their Consumer Confidence Report.

Lead exposure risk in 38674 is rated High. EPA models estimate a 47% probability of lead exposure risk in this ZIP code based on housing age, infrastructure age, and water system data. This typically reflects older housing stock built before 1986 (when lead pipes were banned), aging distribution infrastructure, or detected lead levels in water samples. Families should prioritize getting their tap water tested independently and installing a certified lead-reducing filter.

Lead Exposure Risk Rating
High
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

47%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
📋

Violation History

Past 5 years — EPA SDWIS data

City of Ripley has recorded 3 violations, but none are health-based. Administrative or reporting violations don't directly indicate unsafe water, but they do signal gaps in documentation or monitoring procedures. 1 violation is currently unresolved — meaning the issue has not yet been formally corrected in EPA records. This is a serious concern that residents should follow up on with their water utility.

Total Violations (5 yr)
3
Health-Based Violations
0
Unresolved Violations
1
Boil Water Advisories
0
Compliance Risk
Moderate

Regulatory compliance risk is rated Moderate. City of Ripley has had occasional lapses in compliance but generally meets Safe Drinking Water Act requirements.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 38674. This means EPA monitoring has not found levels of regulated contaminants exceeding the Maximum Contaminant Levels (MCLs) set under the Safe Drinking Water Act — a positive indicator of water quality compliance.

⚖ Enforcement Actions

8 enforcement actions have been issued against City of Ripley — a high number that reflects sustained compliance struggles. Enforcement actions escalate from administrative orders to financial penalties when utilities repeatedly fail to meet safe drinking water standards.
🌊

Water Source & Environmental Factors

Ground Water

This system draws water from underground aquifers. Groundwater is naturally filtered through soil and rock, but can still contain naturally occurring minerals like arsenic, radium, or nitrates.

Water Source Type
Ground Water
EPA Radon Zone

Lower potential

Zone 3
Energy Burden

% of household income spent on energy — indicator of older infrastructure

2.28%

EPA Radon Zone 3 — lower radon potential, though the EPA still recommends testing all homes.

🛡 What Should You Do? — ZIP 38674 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from City of Ripley
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Frequently Asked Questions — ZIP 38674 Water Quality

Is tap water safe to drink in ZIP code 38674?+
Yes — tap water in 38674 (Tiplersville, MS) currently meets all federal EPA standards with a water safety grade of A. No health-based violations are on record in the past 5 years. You can drink your tap water with confidence, though running the tap for 30 seconds in the morning is always a good practice.
What is the lead level in 38674 tap water?+
Lead level data from EPA monitoring is not available for 38674. Contact City of Ripley directly for the most recent lead testing results.
Who provides tap water to 38674?+
Tap water in ZIP code 38674 is provided by City of Ripley (EPA ID: MS0700008). This system serves approximately 11,351 residents. You can contact them directly for Consumer Confidence Reports, current advisories, and billing information.
What is the water source for 38674?+
ZIP code 38674 is served by ground water. Groundwater systems draw from underground aquifers. While naturally filtered, groundwater can still contain naturally occurring contaminants such as arsenic, radium, or nitrates at elevated levels in some regions.
Does 38674 have any active water quality violations?+
Yes — there are currently 1 unresolved violation on record for this water system. Unresolved violations indicate issues that have not yet been formally corrected in EPA tracking systems. Contact City of Ripley for the latest update.
How do I get a copy of my water quality report for 38674?+
Your water utility — City of Ripley — is required by law to send you an annual Consumer Confidence Report (CCR) by July 1 each year. You can also request it directly from the utility or find it online by searching "City of Ripley Consumer Confidence Report." The EPA's ECHO database also has historical compliance data.
What water filter should I use in 38674?+
The right filter depends on what contaminants are present. For lead, look for a filter certified to NSF/ANSI Standard 53. For chlorine byproducts (like THMs), NSF/ANSI 42 filters work well. For a broad range of contaminants including PFAS, look for NSF/ANSI 58 (reverse osmosis) systems. For ZIP code 38674, with a clean compliance record, a standard carbon block filter meeting NSF/ANSI 42 is a good choice for taste and as a precaution.
Is 38674 tap water safe for babies and infants?+
Infants are especially vulnerable to lead, nitrates, and microbial contaminants in drinking water. Current EPA data for 38674 shows no available lead data — we recommend using a certified NSF/ANSI 53 lead filter as a precaution for infant formula. Always consult your pediatrician for guidance specific to your child's health.

Data Sources & Methodology

Water quality data for ZIP code 38674 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by City of Ripley. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →