Skip to main content
WaterSafeCheck

ZIP Code 43041 Water Quality Report

Marysville, OH · Union County County

Safety Score
C

Water Safety Grade

Fair — Some compliance concerns

Health Violations

0

Total Violations

0

Lead Risk

N/A

Contaminants

0

About Tap Water in ZIP Code 43041

Tap water in ZIP code 43041 (Marysville, OH) receives a C grade (score: 66/100) based on EPA monitoring data. While the water from Marysville City Public Water System is treated and regulated, this area has a moderate violation history that residents should be aware of.

Water System

Marysville City Public Water System

EPA ID: OH8000314

Water Source

Surface Water

Population Served

25,571 residents

County

Union County County, Ohio

🧪

Lead Levels in ZIP 43041

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 0.8 ppb — Very Low

The 90th percentile lead level in 43041 is 0.8 ppb, well below the EPA action level of 15 ppb. While this is a reassuring result, the EPA's public health goal for lead is actually zero — no amount of lead is considered completely safe, particularly for children under 6 and pregnant women. Running your tap for 30 seconds before use and using a certified NSF/ANSI 53 filter adds an extra layer of protection.
Lead Level (90th percentile)
0.80 ppb (0.0008 mg/L)
Lead Exposure Risk Rating
Unknown
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
📋

Violation History

Past 5 years — EPA SDWIS data

Marysville City Public Water System has recorded zero violations in the EPA compliance database over the past 5 years — a strong indicator of consistent regulatory compliance and careful monitoring.

Total Violations (5 yr)
0
Health-Based Violations
0
Unresolved Violations
0
Boil Water Advisories
0
Compliance Risk
Low

Regulatory compliance risk for Marysville City Public Water System is rated Low — indicating a consistent track record of meeting EPA reporting and treatment requirements.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 43041. This means EPA monitoring has not found levels of regulated contaminants exceeding the Maximum Contaminant Levels (MCLs) set under the Safe Drinking Water Act — a positive indicator of water quality compliance.

🌊

Water Source & Environmental Factors

Surface Water

This system draws water from lakes, rivers, or reservoirs. Surface water is treated to remove sediment, microorganisms, and chemical contaminants before reaching taps.

Water Source Type
Surface Water
EPA Radon Zone

Highest potential

Zone 1

EPA Radon Zone 1 — highest potential for radon in indoor air. Homeowners should test their home for radon and consider mitigation if levels exceed 4 pCi/L.

🛡 What Should You Do? — ZIP 43041 Recommendations

  • ⚠ Use a certified NSF/ANSI 53 filter for drinking and cooking water if you have young children
  • ⚠ Never give unfiltered tap water to infants in formula — use certified bottled or filtered water
  • ⚠ Request a copy of the Consumer Confidence Report to see what was detected and when
  • ⚠ Call the EPA Safe Drinking Water Hotline: 1-800-426-4791

Frequently Asked Questions — ZIP 43041 Water Quality

Is tap water safe to drink in ZIP code 43041?+
Tap water in 43041 (Marysville, OH) is treated and regulated, but has a grade of C due to past violations. For most healthy adults, treated tap water is generally safe. Families with infants, young children, or immunocompromised individuals may want to use a certified water filter as a precaution.
What is the lead level in 43041 tap water?+
The 90th percentile lead level in 43041 is 0.8 ppb (parts per billion). The EPA action level is 15 ppb. This is a low level, well below the EPA action level of 15 ppb.
Who provides tap water to 43041?+
Tap water in ZIP code 43041 is provided by Marysville City Public Water System (EPA ID: OH8000314). This system serves approximately 25,571 residents. You can contact them directly for Consumer Confidence Reports, current advisories, and billing information.
What is the water source for 43041?+
ZIP code 43041 is served by surface water. Surface water systems draw from rivers, lakes, or reservoirs and must meet strict EPA treatment requirements including filtration and disinfection.
Does 43041 have any active water quality violations?+
No active violations are on record for ZIP code 43041. EPA data shows this water system is currently in compliance with Safe Drinking Water Act standards.
How do I get a copy of my water quality report for 43041?+
Your water utility — Marysville City Public Water System — is required by law to send you an annual Consumer Confidence Report (CCR) by July 1 each year. You can also request it directly from the utility or find it online by searching "Marysville City Public Water System Consumer Confidence Report." The EPA's ECHO database also has historical compliance data.
What water filter should I use in 43041?+
The right filter depends on what contaminants are present. For lead, look for a filter certified to NSF/ANSI Standard 53. For chlorine byproducts (like THMs), NSF/ANSI 42 filters work well. For a broad range of contaminants including PFAS, look for NSF/ANSI 58 (reverse osmosis) systems. For ZIP code 43041, with a clean compliance record, a standard carbon block filter meeting NSF/ANSI 42 is a good choice for taste and as a precaution.
Is 43041 tap water safe for babies and infants?+
Infants are especially vulnerable to lead, nitrates, and microbial contaminants in drinking water. Current EPA data for 43041 shows a lead level of 0.8 ppb — below the action level, but as an extra precaution, run your tap for 30 seconds before use and consider a certified lead filter for infant formula. Always consult your pediatrician for guidance specific to your child's health.

Data Sources & Methodology

Water quality data for ZIP code 43041 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by Marysville City Public Water System. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →