Skip to main content
WaterSafeCheck

ZIP Code 48026 Water Quality Report

Fraser, MI · Macomb County County

Safety Score
A

Water Safety Grade

Excellent — Meets all EPA standards

Health Violations

0

Total Violations

2

Lead Risk

High

Contaminants

0

About Tap Water in ZIP Code 48026

Tap water in ZIP code 48026 (Fraser, MI) is among the safest in the country. Served by City of Fraser,, this area earned a water safety grade of A with a composite score of 88/100 — indicating full regulatory compliance and low contaminant risk across EPA monitoring periods.

Water System

City of Fraser,

EPA ID: MI0002460

Water Source

Surface Water

Population Served

14,297 residents

County

Macomb County County, Michigan

🧪

Lead Levels in ZIP 48026

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 1.3 ppb — Very Low

The 90th percentile lead level in 48026 is 1.3 ppb, well below the EPA action level of 15 ppb. While this is a reassuring result, the EPA's public health goal for lead is actually zero — no amount of lead is considered completely safe, particularly for children under 6 and pregnant women. Running your tap for 30 seconds before use and using a certified NSF/ANSI 53 filter adds an extra layer of protection.

Lead exposure risk in 48026 is rated High. EPA models estimate a 50% probability of lead exposure risk in this ZIP code based on housing age, infrastructure age, and water system data. This typically reflects older housing stock built before 1986 (when lead pipes were banned), aging distribution infrastructure, or detected lead levels in water samples. Families should prioritize getting their tap water tested independently and installing a certified lead-reducing filter.

Lead Level (90th percentile)
1.30 ppb (0.0013 mg/L)
Lead Exposure Risk Rating
High
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

50%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
📋

Violation History

Past 5 years — EPA SDWIS data

City of Fraser, has recorded 2 violations, but none are health-based. Administrative or reporting violations don't directly indicate unsafe water, but they do signal gaps in documentation or monitoring procedures. 1 violation is currently unresolved — meaning the issue has not yet been formally corrected in EPA records. This is a serious concern that residents should follow up on with their water utility.

Total Violations (5 yr)
2
Health-Based Violations
0
Unresolved Violations
1
Boil Water Advisories
0
Compliance Risk
Moderate

Regulatory compliance risk is rated Moderate. City of Fraser, has had occasional lapses in compliance but generally meets Safe Drinking Water Act requirements.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

No health-based contaminant violations are on record for ZIP code 48026. This means EPA monitoring has not found levels of regulated contaminants exceeding the Maximum Contaminant Levels (MCLs) set under the Safe Drinking Water Act — a positive indicator of water quality compliance.

⚖ Enforcement Actions

6 enforcement actions have been issued against City of Fraser, — a high number that reflects sustained compliance struggles. Enforcement actions escalate from administrative orders to financial penalties when utilities repeatedly fail to meet safe drinking water standards.
🌊

Water Source & Environmental Factors

Surface Water

This system draws water from lakes, rivers, or reservoirs. Surface water is treated to remove sediment, microorganisms, and chemical contaminants before reaching taps.

Water Source Type
Surface Water
EPA Radon Zone

Lower potential

Zone 3
Annual Flood Risk Cost

Estimated annual flood-related costs per property

$1
Energy Burden

% of household income spent on energy — indicator of older infrastructure

2.73%

EPA Radon Zone 3 — lower radon potential, though the EPA still recommends testing all homes.

🛡 What Should You Do? — ZIP 48026 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from City of Fraser,
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Frequently Asked Questions — ZIP 48026 Water Quality

Is tap water safe to drink in ZIP code 48026?+
Yes — tap water in 48026 (Fraser, MI) currently meets all federal EPA standards with a water safety grade of A. No health-based violations are on record in the past 5 years. You can drink your tap water with confidence, though running the tap for 30 seconds in the morning is always a good practice.
What is the lead level in 48026 tap water?+
The 90th percentile lead level in 48026 is 1.3 ppb (parts per billion). The EPA action level is 15 ppb. This is a low level, well below the EPA action level of 15 ppb.
Who provides tap water to 48026?+
Tap water in ZIP code 48026 is provided by City of Fraser, (EPA ID: MI0002460). This system serves approximately 14,297 residents. You can contact them directly for Consumer Confidence Reports, current advisories, and billing information.
What is the water source for 48026?+
ZIP code 48026 is served by surface water. Surface water systems draw from rivers, lakes, or reservoirs and must meet strict EPA treatment requirements including filtration and disinfection.
Does 48026 have any active water quality violations?+
Yes — there are currently 1 unresolved violation on record for this water system. Unresolved violations indicate issues that have not yet been formally corrected in EPA tracking systems. Contact City of Fraser, for the latest update.
How do I get a copy of my water quality report for 48026?+
Your water utility — City of Fraser, — is required by law to send you an annual Consumer Confidence Report (CCR) by July 1 each year. You can also request it directly from the utility or find it online by searching "City of Fraser, Consumer Confidence Report." The EPA's ECHO database also has historical compliance data.
What water filter should I use in 48026?+
The right filter depends on what contaminants are present. For lead, look for a filter certified to NSF/ANSI Standard 53. For chlorine byproducts (like THMs), NSF/ANSI 42 filters work well. For a broad range of contaminants including PFAS, look for NSF/ANSI 58 (reverse osmosis) systems. For ZIP code 48026, with a clean compliance record, a standard carbon block filter meeting NSF/ANSI 42 is a good choice for taste and as a precaution.
Is 48026 tap water safe for babies and infants?+
Infants are especially vulnerable to lead, nitrates, and microbial contaminants in drinking water. Current EPA data for 48026 shows a lead level of 1.3 ppb — below the action level, but as an extra precaution, run your tap for 30 seconds before use and consider a certified lead filter for infant formula. Always consult your pediatrician for guidance specific to your child's health.

Data Sources & Methodology

Water quality data for ZIP code 48026 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by City of Fraser,. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →