ZIP Code 48062 Water Quality Report
Richmond, MI · Macomb County County
Water Safety Grade
Excellent — Meets all EPA standards
Health Violations
2
Total Violations
12
Lead Risk
Moderate
Contaminants
1
Active Water Quality Issues Detected
EPA records show 4 unresolved violations. Contact City of Richmond, for current status.
About Tap Water in ZIP Code 48062
Tap water in ZIP code 48062 (Richmond, MI) is among the safest in the country. Served by City of Richmond,, this area earned a water safety grade of A with a composite score of 93/100 — indicating full regulatory compliance and low contaminant risk across EPA monitoring periods.
Water System
City of Richmond,
EPA ID: MI0005670
Water Source
Ground Water
Population Served
6,200 residents
County
Macomb County County, Michigan
Lead Levels in ZIP 48062
EPA action level: 15 ppb | Public health goal: 0 ppb
Lead Level: 1.0 ppb — Very Low
Lead exposure risk in 48062 is rated Moderate. EPA models estimate a 43% probability of lead exposure risk in this ZIP code based on housing age, infrastructure age, and water system data. This may reflect a mix of older and newer housing stock and infrastructure. Families with young children should test their home's water and consider a certified NSF/ANSI 53 water filter.
EPA model estimate based on housing age and infrastructure
Violation History
Past 5 years — EPA SDWIS data
City of Richmond, has recorded 2 health-based violations in the past 5 years. Multiple health violations suggest recurring compliance challenges. Residents should request a copy of the annual Consumer Confidence Report to understand what contaminants were involved and what corrective actions were taken. 4 violations are currently unresolved — meaning the issue has not yet been formally corrected in EPA records. This is a serious concern that residents should follow up on with their water utility.
Regulatory compliance risk is rated Critical — the highest risk category. City of Richmond, has an extensive history of unresolved violations and enforcement actions. Independent water testing is highly recommended.
Contaminants Detected
Contaminants with health-based violations on record
EPA records identify 1 contaminant associated with health-based violations in ZIP code 48062: Stage 2 DBP Rule. These contaminants exceeded the Maximum Contaminant Levels (MCLs) established by the EPA under the Safe Drinking Water Act at some point in the 5-year monitoring period. The presence of these violations does not necessarily mean water is currently unsafe — water systems are often required to increase monitoring and treatment when violations occur. Review the annual Consumer Confidence Report for the most current status.
⚖ Enforcement Actions
Water Source & Environmental Factors
Ground Water
This system draws water from underground aquifers. Groundwater is naturally filtered through soil and rock, but can still contain naturally occurring minerals like arsenic, radium, or nitrates.
Lower potential
% of household income spent on energy — indicator of older infrastructure
EPA Radon Zone 3 — lower radon potential, though the EPA still recommends testing all homes.
🛡 What Should You Do? — ZIP 48062 Recommendations
Your water quality is good
- ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
- ✓ Request your annual Consumer Confidence Report from City of Richmond,
- ✓ If your home was built before 1986, consider testing your own tap for lead
- ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste
Frequently Asked Questions — ZIP 48062 Water Quality
Is tap water safe to drink in ZIP code 48062?+
What is the lead level in 48062 tap water?+
Who provides tap water to 48062?+
What is the water source for 48062?+
Does 48062 have any active water quality violations?+
How do I get a copy of my water quality report for 48062?+
What water filter should I use in 48062?+
Is 48062 tap water safe for babies and infants?+
Data Sources & Methodology
Water quality data for ZIP code 48062 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by City of Richmond,. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →