Skip to main content
WaterSafeCheck

ZIP Code 73463 Water Quality Report

Wilson, OK · Carter County County

Safety Score
A

Water Safety Grade

Excellent — Meets all EPA standards

Health Violations

1

Total Violations

4

Lead Risk

Moderate

Contaminants

1

About Tap Water in ZIP Code 73463

Tap water in ZIP code 73463 (Wilson, OK) is among the safest in the country. Served by Wilson Municipal Authority, this area earned a water safety grade of A with a composite score of 94/100 — indicating full regulatory compliance and low contaminant risk across EPA monitoring periods.

Water System

Wilson Municipal Authority

EPA ID: OK2001001

Water Source

Ground Water

Population Served

1,600 residents

County

Carter County County, Oklahoma

🧪

Lead Levels in ZIP 73463

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 1.8 ppb — Very Low

The 90th percentile lead level in 73463 is 1.8 ppb, well below the EPA action level of 15 ppb. While this is a reassuring result, the EPA's public health goal for lead is actually zero — no amount of lead is considered completely safe, particularly for children under 6 and pregnant women. Running your tap for 30 seconds before use and using a certified NSF/ANSI 53 filter adds an extra layer of protection.

Lead exposure risk in 73463 is rated Moderate. EPA models estimate a 39% probability of lead exposure risk in this ZIP code based on housing age, infrastructure age, and water system data. This may reflect a mix of older and newer housing stock and infrastructure. Families with young children should test their home's water and consider a certified NSF/ANSI 53 water filter.

Lead Level (90th percentile)
1.80 ppb (0.0018 mg/L)
Lead Exposure Risk Rating
Moderate
Lead Exposure Probability

EPA model estimate based on housing age and infrastructure

39%
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
📋

Violation History

Past 5 years — EPA SDWIS data

Wilson Municipal Authority has recorded 1 health-based violation in the past 5 years. A single health violation means the water exceeded an EPA maximum contaminant level (MCL) at some point. Most water systems resolve these quickly, but residents should review the Consumer Confidence Report for details.

Total Violations (5 yr)
4
Health-Based Violations
1
Unresolved Violations
0
Boil Water Advisories
0
Compliance Risk
High

Regulatory compliance risk is rated High. Wilson Municipal Authority has a pattern of compliance issues that goes beyond isolated incidents. Residents should stay informed via their utility's Consumer Confidence Report.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

EPA records identify 1 contaminant associated with health-based violations in ZIP code 73463: Stage 2 DBP Rule. These contaminants exceeded the Maximum Contaminant Levels (MCLs) established by the EPA under the Safe Drinking Water Act at some point in the 5-year monitoring period. The presence of these violations does not necessarily mean water is currently unsafe — water systems are often required to increase monitoring and treatment when violations occur. Review the annual Consumer Confidence Report for the most current status.

Stage 2 DBP Rule

⚖ Enforcement Actions

7 enforcement actions have been issued against Wilson Municipal Authority — a high number that reflects sustained compliance struggles. Enforcement actions escalate from administrative orders to financial penalties when utilities repeatedly fail to meet safe drinking water standards.
🌊

Water Source & Environmental Factors

Ground Water

This system draws water from underground aquifers. Groundwater is naturally filtered through soil and rock, but can still contain naturally occurring minerals like arsenic, radium, or nitrates.

Water Source Type
Ground Water
EPA Radon Zone

Lower potential

Zone 3
Energy Burden

% of household income spent on energy — indicator of older infrastructure

2.96%

EPA Radon Zone 3 — lower radon potential, though the EPA still recommends testing all homes.

🛡 What Should You Do? — ZIP 73463 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from Wilson Municipal Authority
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Frequently Asked Questions — ZIP 73463 Water Quality

Is tap water safe to drink in ZIP code 73463?+
Yes — tap water in 73463 (Wilson, OK) currently meets all federal EPA standards with a water safety grade of A. No health-based violations are on record in the past 5 years. You can drink your tap water with confidence, though running the tap for 30 seconds in the morning is always a good practice.
What is the lead level in 73463 tap water?+
The 90th percentile lead level in 73463 is 1.8 ppb (parts per billion). The EPA action level is 15 ppb. This is a low level, well below the EPA action level of 15 ppb.
Who provides tap water to 73463?+
Tap water in ZIP code 73463 is provided by Wilson Municipal Authority (EPA ID: OK2001001). This system serves approximately 1,600 residents. You can contact them directly for Consumer Confidence Reports, current advisories, and billing information.
What is the water source for 73463?+
ZIP code 73463 is served by ground water. Groundwater systems draw from underground aquifers. While naturally filtered, groundwater can still contain naturally occurring contaminants such as arsenic, radium, or nitrates at elevated levels in some regions.
Does 73463 have any active water quality violations?+
There are 1 health-based violation in the past 5-year record, but no currently unresolved violations according to EPA data. This means past issues have been addressed.
How do I get a copy of my water quality report for 73463?+
Your water utility — Wilson Municipal Authority — is required by law to send you an annual Consumer Confidence Report (CCR) by July 1 each year. You can also request it directly from the utility or find it online by searching "Wilson Municipal Authority Consumer Confidence Report." The EPA's ECHO database also has historical compliance data.
What water filter should I use in 73463?+
The right filter depends on what contaminants are present. For lead, look for a filter certified to NSF/ANSI Standard 53. For chlorine byproducts (like THMs), NSF/ANSI 42 filters work well. For a broad range of contaminants including PFAS, look for NSF/ANSI 58 (reverse osmosis) systems. For ZIP code 73463, with detected contaminants including Stage 2 DBP Rule, a multi-stage filter or reverse osmosis system is recommended.
Is 73463 tap water safe for babies and infants?+
Infants are especially vulnerable to lead, nitrates, and microbial contaminants in drinking water. Current EPA data for 73463 shows a lead level of 1.8 ppb — below the action level, but as an extra precaution, run your tap for 30 seconds before use and consider a certified lead filter for infant formula. Always consult your pediatrician for guidance specific to your child's health.

Data Sources & Methodology

Water quality data for ZIP code 73463 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by Wilson Municipal Authority. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →