Skip to main content
WaterSafeCheck

ZIP Code 78364 Water Quality Report

Kingsville, TX · Kleberg County County

Safety Score
A

Water Safety Grade

Excellent — Meets all EPA standards

Health Violations

3

Total Violations

5

Lead Risk

N/A

Contaminants

1

⚠

Active Water Quality Issues Detected

EPA records show 1 unresolved violation. Contact City of Kingsville for current status.

About Tap Water in ZIP Code 78364

Tap water in ZIP code 78364 (Kingsville, TX) is among the safest in the country. Served by City of Kingsville, this area earned a water safety grade of A with a composite score of 92/100 — indicating full regulatory compliance and low contaminant risk across EPA monitoring periods.

Water System

City of Kingsville

EPA ID: TX1370001

Water Source

Surface Water

Population Served

25,402 residents

County

Kleberg County County, Texas

🧪

Lead Levels in ZIP 78364

EPA action level: 15 ppb | Public health goal: 0 ppb

Lead Level: 1.5 ppb — Very Low

The 90th percentile lead level in 78364 is 1.5 ppb, well below the EPA action level of 15 ppb. While this is a reassuring result, the EPA's public health goal for lead is actually zero — no amount of lead is considered completely safe, particularly for children under 6 and pregnant women. Running your tap for 30 seconds before use and using a certified NSF/ANSI 53 filter adds an extra layer of protection.
Lead Level (90th percentile)
1.50 ppb (0.0015 mg/L)
Lead Exposure Risk Rating
Unknown
Note: Lead levels above are the 90th percentile from EPA monitoring — meaning 90% of samples were at or below this level. Even "undetected" tap water lead doesn't account for lead leaching from home plumbing. If your home was built before 1986, individual tap testing is recommended.
📋

Violation History

Past 5 years — EPA SDWIS data

City of Kingsville has recorded 3 health-based violations in the past 5 years. Multiple health violations suggest recurring compliance challenges. Residents should request a copy of the annual Consumer Confidence Report to understand what contaminants were involved and what corrective actions were taken. 1 violation is currently unresolved — meaning the issue has not yet been formally corrected in EPA records. This is a serious concern that residents should follow up on with their water utility.

Total Violations (5 yr)
5
Health-Based Violations
3
Unresolved Violations
1
Boil Water Advisories
0
Compliance Risk
Critical

Regulatory compliance risk is rated Critical — the highest risk category. City of Kingsville has an extensive history of unresolved violations and enforcement actions. Independent water testing is highly recommended.

⚗️

Contaminants Detected

Contaminants with health-based violations on record

EPA records identify 1 contaminant associated with health-based violations in ZIP code 78364: Haloacetic Acids (HAA5). These contaminants exceeded the Maximum Contaminant Levels (MCLs) established by the EPA under the Safe Drinking Water Act at some point in the 5-year monitoring period. The presence of these violations does not necessarily mean water is currently unsafe — water systems are often required to increase monitoring and treatment when violations occur. Review the annual Consumer Confidence Report for the most current status.

Haloacetic Acids (HAA5)

⚖ Enforcement Actions

10 enforcement actions have been issued against City of Kingsville — a high number that reflects sustained compliance struggles. Enforcement actions escalate from administrative orders to financial penalties when utilities repeatedly fail to meet safe drinking water standards.
🌊

Water Source & Environmental Factors

Surface Water

This system draws water from lakes, rivers, or reservoirs. Surface water is treated to remove sediment, microorganisms, and chemical contaminants before reaching taps.

Water Source Type
Surface Water
EPA Radon Zone

Lower potential

Zone 3

EPA Radon Zone 3 — lower radon potential, though the EPA still recommends testing all homes.

🛡 What Should You Do? — ZIP 78364 Recommendations

  • ✓ Run cold water for 30 seconds each morning before use — especially if pipes are old
  • ✓ Request your annual Consumer Confidence Report from City of Kingsville
  • ✓ If your home was built before 1986, consider testing your own tap for lead
  • ✓ Use a pitcher filter (NSF/ANSI 42 certified) for improved taste

Frequently Asked Questions — ZIP 78364 Water Quality

Is tap water safe to drink in ZIP code 78364?+
Yes — tap water in 78364 (Kingsville, TX) currently meets all federal EPA standards with a water safety grade of A. No health-based violations are on record in the past 5 years. You can drink your tap water with confidence, though running the tap for 30 seconds in the morning is always a good practice.
What is the lead level in 78364 tap water?+
The 90th percentile lead level in 78364 is 1.5 ppb (parts per billion). The EPA action level is 15 ppb. This is a low level, well below the EPA action level of 15 ppb.
Who provides tap water to 78364?+
Tap water in ZIP code 78364 is provided by City of Kingsville (EPA ID: TX1370001). This system serves approximately 25,402 residents. You can contact them directly for Consumer Confidence Reports, current advisories, and billing information.
What is the water source for 78364?+
ZIP code 78364 is served by surface water. Surface water systems draw from rivers, lakes, or reservoirs and must meet strict EPA treatment requirements including filtration and disinfection.
Does 78364 have any active water quality violations?+
Yes — there are currently 1 unresolved violation on record for this water system. Unresolved violations indicate issues that have not yet been formally corrected in EPA tracking systems. Contact City of Kingsville for the latest update.
How do I get a copy of my water quality report for 78364?+
Your water utility — City of Kingsville — is required by law to send you an annual Consumer Confidence Report (CCR) by July 1 each year. You can also request it directly from the utility or find it online by searching "City of Kingsville Consumer Confidence Report." The EPA's ECHO database also has historical compliance data.
What water filter should I use in 78364?+
The right filter depends on what contaminants are present. For lead, look for a filter certified to NSF/ANSI Standard 53. For chlorine byproducts (like THMs), NSF/ANSI 42 filters work well. For a broad range of contaminants including PFAS, look for NSF/ANSI 58 (reverse osmosis) systems. For ZIP code 78364, with detected contaminants including Haloacetic Acids (HAA5), a multi-stage filter or reverse osmosis system is recommended.
Is 78364 tap water safe for babies and infants?+
Infants are especially vulnerable to lead, nitrates, and microbial contaminants in drinking water. Current EPA data for 78364 shows a lead level of 1.5 ppb — below the action level, but as an extra precaution, run your tap for 30 seconds before use and consider a certified lead filter for infant formula. Always consult your pediatrician for guidance specific to your child's health.

Data Sources & Methodology

Water quality data for ZIP code 78364 is compiled from the EPA Safe Drinking Water Information System (SDWIS), EPA ECHO enforcement database, UCMR5 unregulated contaminant monitoring, and Consumer Confidence Reports filed by City of Kingsville. Safety scores are composite metrics derived from violation history, lead levels, enforcement actions, and infrastructure risk indicators. Data reflects a 5-year monitoring window. Last dataset update: 2024. View EPA source data →